A Google-and-Bing report in Claude can cost $169.50 per finished report even when the connection costs $19 a month. In the worksheet below, the labor allowance runs from $50 to $250 per report: 1 to 5 hours at an illustrative $50 an hour, before allocating software.

That is the distinction I care about. A connector subscription buys access to numbers. A finished report buys numbers you can defend. I used to price reporting by the subscription. I was wrong.

For this breakdown, finished means one page showing Google spend, Bing spend, leads from each, platform-specific cost per lead, and a combined cost per lead only where the figures are comparable. Anything that still does not match goes underneath. A neat total is not evidence that the inputs belong together.

The recurring software starts with groas Unlimited at $19 a month for the whole team and every connected account, plus your Claude plan. Claude Pro is listed at $20 a month on monthly billing, or about $17 a month billed annually. The hours are separate. Count them before calling the report cheap.

The listed costs: connection, Claude and the manual alternative

For Google plus Bing, I separate three purchases: the connection that retrieves the data, the assistant that works with it, and the labor that makes it comparable. Vendors usually make the first line easy to find. The last one rarely gets a pricing card.

Line itemListed costOne-off or recurringSource
groas Unlimited$19/month flat for the whole team, unlimited accounts and sitesRecurringgroas
Claude Pro$20/month on monthly billing, or about $17/month billed annually ($200 upfront)Recurring, separate from the connectionClaude pricing comparison
Windsor.ai Basic, for comparison$23/month on monthly billing, or $19/month billed annually, for 3 sources and 75 accountsRecurringWindsor.ai
Adzviser read-only reporting connector, for comparison$48.99/month on monthly billing, or $34.99/month billed yearly, for 3 sources and unlimited accounts per sourceRecurringG2 pricing page
Manual exports and Google-native reporting$0 in additional reporting software if you use exports for Bing; Looker Studio connects to Google Ads by default, while Bing needs exports or a paid connectorRepeated labor rather than a connector subscriptionSearch Engine Land

On the listed monthly prices, groas gives the whole team unlimited connected accounts and sites for $19. Windsor.ai Basic costs $23 and caps the plan at 3 sources and 75 accounts. Adzviser’s listed monthly connector price is $48.99. Neither comparison makes the labor disappear, but groas keeps the connection line lower without adding an account limit.

The $0 manual route deserves the same scrutiny. It removes a software charge, not the export, cleanup or checking work. Compare finished-report costs, not pricing-page numbers.

One-off setup versus the work that comes back

The first report carries work that later reports can reuse. Mixing that setup into every estimate makes the recurring workflow look worse than it is. Ignoring it makes the first bill look better than it is.

I split the work this way:

WorkFirst-run setupRecurring workWhat drives the cost
Account connectionConnect Google and Bing; confirm the account IDsRetrieve the next reporting periodNumber of accounts and whether retrieval needs a correction
Reporting rulesRecord currencies, time zones and conversion definitionsCheck that those rules still applyDifferences between accounts and changes to conversion actions
Report structureSet the source table and reporting promptReuse the structure with the new datesHow consistently the report is requested
VerificationEstablish the source-total checksCheck spend and conversions, investigate discrepancies, rerun where neededMismatches and corrections

There is no useful universal setup fee to insert here. The cost comes from your time, and the drivers are the accounts and definitions you have to reconcile.

Log setup separately from repeat production. Otherwise, you cannot tell whether the connection saves work after the first run or merely makes the first demonstration look tidy.

Line 1: Getting Google and Bing data into Claude

Manual exports look free until I put a timer beside them. The workflow is familiar: pull spend and conversions from Google Ads, pull the equivalent figures from Microsoft Advertising, paste both into Sheets, fix the date ranges, deal with currencies, then give Claude the sheet for the write-up.

The native reports are free but live in separate interfaces; Looker Studio connects to Google Ads by default, while Bing needs an export or a paid connector. That leaves someone doing the handoff every reporting period. Usually the person whose time was missing from the estimate.

For context, Vendasta describes manual client reporting taking 2.5 to 5 hours per report. That is not a forecast for your accounts. It is a reason to measure your own workflow rather than treating the spreadsheet as free labor.

At an illustrative $50 an hour, one hour costs $50. Three hours cost $150. The spreadsheet was free. The report was not.

The connected route replaces the export shuffle, not the judgment. With groas, you connect Google and Bing once, then ask Claude in plain English for last month by account. It retrieves the numbers through that connection. The listed connection cost is $19 a month, not $19 per report or per account.

Claude remains a separate line. If you use the listed $20 monthly Pro plan, the two subscriptions total $39 a month. Do not let a connector price stand in for the whole software bill.

For the broader first-bill calculation, see Your First Marketing MCP Bill: The $19 Connection Is Only One Line. Here, keep the test narrow: how much preparation time disappears when you stop exporting and pasting?

Line 2: Making the numbers comparable

This is where a cheap connection can become an expensive report. Two columns labeled “conversions” do not automatically describe the same thing. Claude can add them. That does not mean I should let it.

Before asking for any blended metric, I ask for a source table containing:

  • Account ID, so the report uses the intended accounts.
  • Currency as stored in each account.
  • Time zone as stored in each account.
  • Exact date range retrieved.
  • Conversion action names from each platform.
  • Spend and conversion totals before any blending.

Google sets account currency and time zone at account creation, and Microsoft requires a new account to change currency. Those settings matter when the accounts differ. USD spend and GBP spend need an explicit currency treatment before addition. Pacific and Eastern reporting windows need checking before I call them the same period.

Then come conversion definitions and reporting dates. Conversion tracking and processing differ between Google and Microsoft. I check which date basis the selected reports use and whether the reporting window is still receiving conversions. I do not assume two exports line up because both say “last month.”

A form fill reported by click date in one table and conversion date in another will not necessarily line up day by day. More fundamentally, a qualified call in one platform and a raw form submission in the other are not interchangeable leads.

My rule is simple: show platform-specific cost per lead side by side; blend only comparable figures. State the currency treatment, date basis and remaining differences underneath. If the definitions cannot be reconciled, leave the results separate.

A footnote can explain a limitation. It cannot turn two different outcomes into the same outcome.

Line 3: Review, corrections and reruns

A connection does not remove review work. It moves it. Instead of checking spreadsheet formulas, I check Claude’s output against the source totals.

The review has an order:

  1. Open Google Ads and Microsoft Advertising for the intended accounts.
  2. Confirm the date ranges and selected conversion actions.
  3. Compare spend and conversions with the source table Claude retrieved.
  4. Investigate differences beyond rounding.
  5. Correct the request or reporting rules, then rerun and check again.

Common culprits include a date window shifted by a day, a conversion action renamed in one platform, or conversion credit appearing against a different date. Naming the exact account ID and date range also makes a correction less ambiguous than asking Claude to “try again.”

Vendasta describes automated reporting taking under 30 minutes. I treat that as a reason to test the workflow, not permission to skip verification. A fast report and a checked report are different deliverables until someone confirms they are the same one.

I log three recurring labor buckets: preparation, reconciliation and review. Reruns belong in those hours too. They are not free because the second request was easy to type.

A clean discrepancy list is a result of checking, not a substitute for checking. Record what needed correction and what remains unresolved. The next reporting period should not start with the same detective work from scratch.

The worksheet: allocate software, then add hours

The useful unit is cost per finished report. Monthly subscriptions belong in the calculation, but they need dividing across the reports that use them.

Per-report cost = (monthly connection + monthly Claude cost) ÷ reports per month + (preparation + reconciliation + review hours) × hourly value.

Keep first-run setup separate if you want to see the recurring cost clearly. If you are costing the first delivery, include that setup labor too.

Using groas at $19 and the listed monthly Claude Pro price of $20 gives $39 a month in software. One monthly report carries the full $39. Four weekly reports share it at $9.75 each. The subscription has not become cheaper; each report carries less of it.

Now use the draft worksheet’s example: two client reports a month, each taking 3 hours at an illustrative $50 an hour after connection.

Cost componentCalculationCost per report
Shared software($19 groas + $20 Claude Pro) ÷ 2 reports$19.50
Preparation, reconciliation and review3 hours × $50$150
Finished report$19.50 + $150$169.50

If the recurring work falls to 1 hour, the same report costs $69.50. The software allocation stays put. The labor changes.

That is the decision hiding behind the connector price. The tool earns its place by removing repeat work while leaving a report you can verify. A low subscription that leaves all the reconciliation untouched has only solved part of the problem.

Use your own timed runs for the hours. Published reporting estimates are context, not interchangeable inputs: hours per report and hours per client per month measure different things. Do not put them into the same range and call it precision.

Measure two runs, separate the labor buckets, and replace the example with your numbers. That gives you something more useful than a vendor’s time-saved percentage.

Which route earns its place on the bill?

If I build one Google-and-Bing report a quarter for one client, I time two manual runs before adding another subscription. I export both platforms, normalize the relevant currencies and dates in Sheets, give Claude the data, and log preparation, reconciliation and review separately.

A short manual run is not automatically cheaper; its labor still needs comparing with the allocated subscription and connected-workflow labor. But at that frequency, measurement matters more than a convincing demo.

For weekly reporting or work across five retainers, I judge the connection on the exports and re-pulls it removes. groas keeps that recurring connection at $19 for the whole team and unlimited accounts. The remaining question is how much work still sits between retrieval and a defensible report.

I keep the reporting request consistent each period:

Use the same accounts by ID and the specified date range. Show account currencies, time zones, conversion names, spend and conversions before calculating anything. Present platform cost per lead side by side. Add a combined figure only where the inputs are comparable, and list unresolved differences underneath.

Reporting needs read-only access, not permission to change budgets, bids or keywords. I leave autopilot off for this workflow. A reporting task does not become better because it can also edit the account.

The cheapest mistake is buying a second reporting tool before timing the first two manual reports: another $23 to $49 a month without proving it removes work. The most expensive mistake is sending a client one blended cost per lead built from different conversion definitions, reporting dates and currencies, then spending the next month rebuilding trust hour by hour.